After deciding the line to be a busbar trunking line, appropriate current is computed. Busbar trunking line AB - HLP - SP is selected due to computed current. Project is drawn refering type values and a report is created due to this project and values.

Technical Instructions

Busbar Trunking System is manufactured with a galvanized sheet-metal, could be joined and by given a mechanical strength with a rolling machine a product with quality is produced.
Additionally joint points are attached with a special part in order to prevent the line from the mechanical impacts.

Conductors of AB - HLP are isolated with PVC conductor numbers are 4 pieces which are ( L1, L2, L3, N+Pe ) Neutr conductor cross section is equal to phase elements cross-sections. For earthing, galvanized sheet-metal is used.
For SP types busbar line is competed with the conductors a parallel and non-touching path. In this type busbar line is manufactured with 4 or 5 conductors. Standart production is with four conductors and the body used as earthing.
Busbar line having straight lengths and strong joints provide perfect mechanical strength to the busbar line. In case of vibration on the line, it is tolerated by the lighting loads. Earthing is supplied by just screwing one terminal.

All these types and products are tested due to the IEC 60439-1-2 standart. Any BUS system can be fitted for the bidirectional management of the inputs and outputs located on the busbar.

By connecting a smoke / presence / light intensity control, it is possible to be advised in case of fire and intrusion with installation of covered cable channel.

Advantages

Joint Elements

For adaptable power distribution systems in order to gain more place and possibility to install the line in both horizontally and vertically. Easy and fast installation is made in 3-levels as follows:

1. Busbar clamping unit is placed for joining the two busbars.
2. For screwing the terminal block, 12 mm nut key is used.
3. No necessity of any skilled person or special tools.

Advantages of Busbar Trunking Systems

Easy:
Easy to design power distribution and clear network structure, easy engineering and installation possibility.

Safe:
Low ignition energy and high short circuit values. Factory safeness without looking the types.

Fast:
Fast installation with minimum tools. Reduced installation time.

Flexible:
Installations can be extended and modified.